Your Address : Globalchemmade--Paalsun Engineers (India) Pvt. Ltd.
Name:Paalsun Engineers (India) Pvt. Ltd.
Type:Others
Tel:+(91)-(44)-26583112
Fax:+(91)-(44)-26583112
Address:India
Equipments detail
| Equipment: | Plate Separators |  |
| Equipment Type: | Separation Equipment -> Air Separation Plant | |
| Unit Type: | ||
| Technical Parameters: | ||
| Post Time: | 2011-01-26 | |
| Main Features: | Lamella plate separators (IPS) consists of two main components, the upper tank containing the lamella plates inclined at 55 degree and the lower conical or cylindrical sludge tank. The feed for the IPS enters through vertical chambers on either side of the lamella packs and passes into each plate gap through slotted feed ports. Clarification takes place above the suspension inlet so there is no mixing of the clarified fluid with the incoming feed. Above each pack is a full-length overflow launder fitted with throttling holes to a slight hydraulic back pressure on the incoming feed stream. This method of feed control guarantees equal distribution to all lamella chambers with minimum turbulence at the entry points. The solids settle onto and slide down each lamella plate to the sludge tank where the solids are further thickened and compressed with the assistance of the raking system. | |
| Usage: | ||
| Description: | Lamella plate separators (IPS) consists of two main components, the upper tank containing the lamella plates inclined at 55 degree and the lower conical or cylindrical sludge tank. The feed for the IPS enters through vertical chambers on either side of the lamella packs and passes into each plate gap through slotted feed ports. Clarification takes place above the suspension inlet so there is no mixing of the clarified fluid with the incoming feed. Above each pack is a full-length overflow launder fitted with throttling holes to a slight hydraulic back pressure on the incoming feed stream. This method of feed control guarantees equal distribution to all lamella chambers with minimum turbulence at the entry points. The solids settle onto and slide down each lamella plate to the sludge tank where the solids are further thickened and compressed with the assistance of the raking system. | |